All types, all shapes: This machine can cut carbon, stainless and aluminum in any shape or form.
Imagine that you need to put a through-hole at the center of a tube. It must be centered to the actual dimensions, not just one. This will make things more complicated. This is how tube manufacturing works.
Lasertube systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.
Large diameter profiles and tubes can be made with the fiber solution. Tubes up O 14 inches (355 mm).3D cutting modeFiber Laser
Remember that there is no perfect tube. They can have bows. They can have weld seams that protrude on both the interior and exterior of the tube. This material can be difficult to process consistently and quickly when there are inconsistencies from one product to the next.
PowerLine C are CO2 laser-based systems for precision drilling, cutting, scribing, marking, and engraving of many non-metals, including glass, organic materials.
Fully automated solution that guarantees maximum productivity while allowing for rapid production changes. Tube O Range minimum. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser
Parts are held with automatic tabbing (done in FabCreator), and a set of jaws on the drive chuck and the idler chuck
All types and all shapes: This 3-dimensional cutting machine cuts carbon, aluminum, stainless, and red metals. It is available in round, rectangular, irregular and square shapes.
The weld seam is another consideration when tube cutting. This material is roll-formed, then welded together. Two points are usually required to be addressed.
Fiber solution for large-diameter tubes and profiles Tubes up O14" (355mm) 3D cutting modeFiber laser
The wavelength of fiber lasers is 1.06 microns. This is 10% less than the wavelength of a CO2 laser beam. The fiber laser emits a beam with a shorter wavelength that is more easily absorbed and reflected by reflective materials than a CO2 laser. Fiber laser cutting machines are able to cut brass, copper and other reflective materials. Be aware that the CO2 laser beam can damage not only the machine's lens but also the entire beam path. This risk is eliminated by using a fiber-optic cables for the beam path.
The simplest way to enter the tube laser cutting world. Tubes up to Ø 4,72" (120 mm)2D cutFiber laser
Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.