All types, all shapes: This three-dimensional cutting machine will cut carbon, stainless, aluminum and red metals; in round, square, rectangular and irregular shapes.
How can you compensate for this? Traditionally, you will touch your face with a sensor marking the contact point. The tube is then rotated and the opposite end of the tube touched. The control will then be able to see how bent the tube looks. This allows for precise measurements and ensures that the through-holes will work properly. Keep in mind, however, that every rotation of the tube reduces the ability for very high tolerances.
Gulf States Saw & Machinery Co., Inc.’s team of experts will work with your to create a program specifically tailored to your needs. We will assess how your part is produced currently, as well as its intended application and end use. Together, we will identify and meet your specific needs.
PowerLine C CO2 laser-based systems are used for precision drilling and cutting, scribing marking, engraving, and scribing on many non-metals such as glass, organic materials, and other non-metals.
Motion Dynamics is a leading manufacturer of neurological sub-assemblies, including steerable catheters and “pull-wire” assemblies, making use of our StarCut Tube machines for precision cutting of key components.
StarCut Tube, the laser cutting system StarCut Tube, SL offers high precision, superior reliability and high performance when cutting complex medical device such as stents or aortic replacements.
Sheet laser cutting offers many possibilities and complexity in material loading and unloading automation. Tube laser cutting systems have only recently been available with tube storage systems that allow for automatic handling of tubes and sectionbars and unmanned production changes.
PowerLine C is a CO2 laser-based system for precision drilling, cutting and scribing of many non-metals including glass and organic materials.
This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser
A laser cutting machine that cuts sheet metal can change out a sheet in seconds. The same can be done on a laser tube cutting machine, but it’s a whole different story as to how it’s done.
A weld-seam is an additional consideration when cutting tube. This material can be roll-formed and welded together. This raises two issues that must be addressed.
The worthwhile laser tube cutting machine: the TruLaser Tube 3000 fiber is economical even when it is not being fully utilized. Thanks to its reliability and easy of operation, it is perfect for first-time users or as a supplementary machine.
StarCut Tube Laser SL is the best laser cutting system for complex medical devices, such as stents and aortic valve replacements.
The ability to choose between 2D and 3D laser cutting technology opensup the possibility of individually customized and precise cutting of parts in avery wide variety: tubes with round, square, and rectangular shapes as well asprofiles with diverse open cross-sections (for example H, L, T, and Ucross-sections). In addition tostraight cutting edges, the 3D technology also enables bevel cuts up to 45degrees. This versatility eliminates the need for costlymilling, drilling, punching, or sawing processes.
Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.