Tube Laser Cutting Systems Kickstarter

What is the difference between fiber laser and CO2 laser

Design, durability, usability and compactness are the most important construction standards in the production of fitness equipment.

This is a third of the full 20-foot (240") length of a tube. It makes it easy to make three stock pieces. You can still buy full length tubes without having to waste any material

When you look closely at a fiber-laser in operation, some things may not be as obvious. A fiber laser's beam diameter is one-third larger than that of a co2 beam. This allows it to have a higher power density. This allows the fiber not only to cut faster but also to pierce much faster. The fiber's smaller beam size allows it to cut intricate shapes, and leave sharp edges. Imagine cutting the logo of your company from a tube where the spacing between the letters is 0.035inches. A fiber can achieve that cut while a laser with CO2 cannot.

StarFiber Series combine compact fiber lasers with optional focusing heads for laser welding or cutting, including SmartWeld™ technology for fine and wide welds.

Tube Lasers Cutting Systems Xp

Find out how the Coherent StarCut Tube (and StarFiber laser powered cutting machines) helped NPX Medical get a competitive edge in stent manufacturing.

How do you compensate for that? Traditionally, you are going to come down and touch the face with a sensor that marks the contact point. The tube is then rotated, and the opposite side of the tube is touched. That gives the control an idea of just how bowed the tube is. This method is accurate and can ensure those through-holes work out for the application. But keep in mind that each time a rotation of the tube occurs, the ability to deliver very high tolerances is reduced.

Tube Lasers Cutting Systems Xp
Tube Laser Cutting Systems Yawei

Tube Laser Cutting Systems Yawei

You should remember that there are no perfect tubes. They have bows. They may protrude from the interior as well as the exterior of the tube. It is difficult to process this material in a consistent and rapid manner when there are such inconsistencies among products.

Let's see below the advantages of using an Automatic Tube and Section Bar Storage System with a Lasertube Cutting System.

Tubing

No need to coordinate multiple orders and vendors. Gulf States Saw & Machinery Co., Inc. can handle everything from material procurement to past delivery.

It's one-third of a full 20 foot (240") tube. Therefore, it is convenient to make three stocks. This allows you still to buy full tube lengths, without having any wasted material.

Tube Laser Cutting Systems Engraving
Tube Laser Cutting Systems Engraving

You can take a look at our StarCut Tube production area and lab to learn more about these multi-axis CNC machines for tubes, flat materials and medical devices like catheter shafts and hypotubes.

Laser systems are available for electronics manufacturing. They can perform cutting, welding marking, marking, and ablation with high precision.

Youtube Laser Cutting

The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.

You will find the perfect solution for your laser fabrication needs, while still ensuring process quality and efficiency in both metal and nonmetal fabricating.

Frequently Asked Questions

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.

The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.