All types, all shapes: This machine can cut carbon, stainless and aluminum in any shape or form.
Imagine that you need to put a through-hole at the center of a tube. It must be centered to the actual dimensions, not just one. This will make things more complicated. This is how tube manufacturing works.
All types and all shapes: This 3-dimensional cutting machine cuts carbon, aluminum, stainless, and red metals. It is available in round, rectangular, irregular and square shapes.
Remember that there is no perfect tube. They can have bows. They can have weld seams that protrude on both the interior and exterior of the tube. This material can be difficult to process consistently and quickly when there are inconsistencies from one product to the next.
PowerLine C are CO2 laser-based systems for precision drilling, cutting, scribing, marking, and engraving of many non-metals, including glass, organic materials.
Lasertube systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.
Large diameter profiles and tubes can be made with the fiber solution. Tubes up O 14 inches (355 mm).3D cutting modeFiber Laser
Perhaps you have noticed that we haven’t yet discussed cutting speed. Although it is possible to cut 500 inches per minute with a tube, this is not always feasible. Laser tube cutting should not be about how long it takes for a tube to be loaded, indexed so that it is in the right place for cutting, pierce it and then unload it. Laser tube cutting machines are more concerned with part-processing times than cutting speed.
Cambus Medical uses Coherent StarCut Tube and Select Laser Welders laser-powered tubes cutting machines to create business success.
The wavelength of fiber lasers is 1.06 microns. This is 10% less than the wavelength of a CO2 laser beam. The fiber laser emits a beam with a shorter wavelength that is more easily absorbed and reflected by reflective materials than a CO2 laser. Fiber laser cutting machines are able to cut brass, copper and other reflective materials. Be aware that the CO2 laser beam can damage not only the machine's lens but also the entire beam path. This risk is eliminated by using a fiber-optic cables for the beam path.
The simplest way to enter the tube laser cutting world. Tubes up to Ø 4,72" (120 mm)2D cutFiber laser
Fully automated solution that guarantees maximum productivity while allowing for rapid production changes. Tube O Range minimum. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser
Parts are held with automatic tabbing (done in FabCreator), and a set of jaws on the drive chuck and the idler chuck
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.
The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.