Technical Sidemount Scuba Dive Training Hawaii

Scuba Set

Sidemount PCB staging: This is where the diver is setting up cylinders with tank straps, bungee, clips and special valves (left and right-handed). and is the practice of using sidemount configuration (bungee loops and/or butt-plate rails) as a means for stowing stage/deco cylinders in a streamlined manner against the sides of the torso, when otherwise diving in back-mounted doubles or CCR

If you're at the age of 18 and have logged at minimum 30 dives, you can apply for a Tec SIDEMOUNT PCB Diver course. It is highly recommended to also have a PADI Enriched A Diver certification.

As a Rebreather CCR diver you will always carry bailouts cylinders with you. Yes you can clip the tank to your side and not think anything more of it, but once you have done a Sidemount PCB course you learn how to properly stage tank to either side and if you are a Trimix CCR Diver even how to stage 3-4 tanks comfortably and safely.

You may be eligible for certifications from other diving organizations - check with your Tec Sidemount PCB Instructor.

Technical Sidemount Scuba Dive Training 001

I have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The Sidemount PCB Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and puts a lot of time... read moreI have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The Sidemount PCB Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and puts a lot of time and effort in everything he does with his students. Everything is planned and worked with great detail. I found it a memorable and a rewarding experience. The Sidemount PCB Essentials Course transformed my diving. My awareness and skills level under water raised where I never expected in such a short period of time. Everything is in the right place... the harness set up, the weight amount and position, the cylinder trim and your balance in the water. This makes you feel very relaxed, confident and experience the true sidemount set up... and no back pain!!! ?? The course was very demanding yet very enjoyable. Every day starts with a theoretical and planning session and ends with a video review about our drills in the water where everything is discussed in great detail. We drained our cylinders every time we went into the water and that's why our learning curve is so high! Everything was done in a relaxed and secure atmosphere yet with extraordinary professionalism. Don't think twice about taking this course with Steve. If you are truly engaged in Sidemount PCB and want to be a great diver, Steve will help you to achieve more than you ever expected! read less

sidemountpcb.com is an essential component for recreational and technical divers. The beginning of my technical training was sidemount essentials. I completed a Tec40 / sidemount class in Florida before starting my training with Joe. Joe was able to concentrate on the in-water skills through online training. Although I had previously taken a Tec40 / sidemount class before starting my technical training with Joe, I consider that the start of my technical education sidemount essentials. Joe could focus on developing in-water skills through the online training. This was essential for cave training as well as all other technical training such trimix with Vas Profud. It demonstrates the high-quality inwater training that all divers should receive and accelerates in-water skill development. My daughter, who is beginning her journey into diving, watched the backmount dive videos before she started open water training. I am currently reviewing the instructor videos to make sure that I'm the best "buddy" I can be for her during her training process. These tools are vital in the safe development of technical and recreational divers. Daniel Glynn, father and cave diver

Technical Sidemount Scuba Dive Training 001
Technical Sidemount Scuba Dive Training Online Free

Technical Sidemount Scuba Dive Training Online Free

Your efforts are greatly appreciated. I began sidemounting using your online videos and completed a speciality class on it. Just a few days ago, I finished UTD Cave 1. Sir, it was a great learning experience. Keep the great content coming

International Training, the parent organisation for Technical Diving International / Scuba Diving International (TDI), offers both the SDI and TDI versions their Sidemount PCB Diver course. Both courses are very similar. Both courses share the same learning materials (which were written by us). What is the difference?

Technical Sidemount Scuba Dive Training Hawaii

Technical Sidemount Scuba Dive Training Workouts

Hi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also... read moreHi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also love your enthusiasm to capture all those details, new equipment, new methods, hints etc. with the camera to be able to include them in upcoming videos to the benefit of everyone. Speaking of your online training videos I must say that they are a class of its own. They definitely get you well-prepared for the things you need to know during the in-water training and I think that exactly this concept is the key to the steep learning curve because the time underwater can be used efficiently. Thank you so much for everything Steve! Cheers, Nils read less

It was amazing to have such a positive experience with your online class. In my scuba 'career,' I had very few interactions with other instructors, but I can tell you that I have never experienced such useful, deep and practical explanations about how I can become a better scuba diver. When I completed my PADI AOOW training, buoyancy control was a problem as I attempted to capture my SMB ..... Read more I am so grateful for your informative online course. In my scuba 'career, I had very few interactions with other instructors, but I can tell you that I have never seen so many practical and helpful explanations about how to become an even better diver. I struggled with buoyancy control when I attempted my SMB while I was doing my PADI OOW training. I asked my instructor how to improve buoyancy. He told me to just practice. He assured me that he had good buoyancy controls, but he didn't explain the importance proper weighting or breath control to me. Your videos were a real eye opener. Not to mention the fact that my sidemount diving buddy did not understand why I wanted it. Even now, highly recommended instructors often ask me why sm is important. What's the purpose of it? It's a common practice for cave divers. I am happy I chose sm. It is a completely different world. No one ever taught me or inspected my SM. However, when I dive with others they often comment on how well my trim is. I learned everything from your videos. You showed me how to set up equipment, get in and out of water, solve problems, and so on. I hope to meet you and to have a training with you. Because I want to make scuba diving better and to help others become more skilled divers. Although I know that there are many talented divers and instructors, I think your contribution to the diving community is very significant. Thank you! Regards, Csaba read less

How long can you stay underwater with a scuba tank
How long can you stay underwater with a scuba tank

Sidemount PCB diving has been growing in popularity among technical divers for general decompression diving. It is also becoming an increasingly popular specialty for recreational diving with many diver certification agencies offering both recreational and technical level sidemount training programs.

You don't need sidemount for your cave diver training. We recommend our CDS Basics Orientation program.

Ssi

This course will teach you about sidemount diving, and how to create a tec sidemount helmet. One confined water session, four open water sessions and hands-on training are included. You will start with two tanks and expand to at least two additional tanks.

Sidemount diving is allowed after successful completion of the course. As long as these limits are met, graduates can engage in sidemount dive activities without supervision.

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.