Technical Sidemount Scuba Dive Training Manual

How do you Sidemount scuba

Love your vids Steve. I'm located in Nova Scotia Canada. In August, I received my tdi Sm certification. Your online course is a supplement to my training. It's been very helpful! Thank you!

Your instructor series, Steve/Vas is amazing. Let me be the first one to tell you that you are absolutely correct. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. Then, I... read moreSteve/Vas. Your instructor series is amazing. Let me be the first one to tell you that you are right in everything you have said. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. The first level of tech diving was taken by me a year later. I told my instructor that I was using SM configuration. He was shocked that I did not teach myself. I told him, and he replied with "You most likely will need to take a SM workshop together depending on how well I do on dive one". He said that there was no reason to have you take a class after the first dive. Your online training is excellent, but I'd rather see Joe Seda if it was all over again. I will continue to learn from him in the future. Regards Tony read less

Sidemount PCB Harness. This is a special Harness that looks like a BCD. It is very lightweight and extremely minimal. The harness comes with several D rings on the shoulder straps, as well as a Butt plate that has sliders or rings.

Although I've never attempted sidemount, after studying his online training I knew that Steve was the right man to guide me and make sure I succeed. I was right! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He's patient and takes time to explain sidemount. I have never tried it before, but after watching his online video training, knew that Steve was the best man to guide me through it. I was correct! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He is patient and gives his time to all of his students. Every step is carefully planned. It was memorable and rewarding. Sidemount PCB Essentials Course has changed the way I dive. I was amazed at how quickly my awareness and skills levels under water increased. Everything is in place: the harness, the weight and position of the swimmers, the cylinder trim and the balance in the water. This allows you to feel confident and relaxed. Although the course was quite challenging, it was extremely enjoyable. Every day began with a planning session, followed by a video review on our drills in the sea. Every time we got in the water, we had to drain our cylinders. That's why our learning curve was so steep! All of it was done with exceptional professionalism in a safe and relaxed atmosphere. Steve is a great instructor and I recommend this course. Steve will guide you to greatness if you are passionate about Sidemount PCB. read less

Technical Sidemount Scuba Dive Training Manual

Technical Sidemount Scuba Dive Training Gym

I want to thank you for all your help. Your online resource made it possible for me to take a sidemount cave course with Natalie Gibb, Mexico.

Technical diving is a multi-tank sport. Sidemount PCB is a popular way to set up multiple cylinders for technical dive. The Tec Sidemount PCB Diver course will allow you to enter the world of tec dive and then apply the knowledge to other TecRec courses. This course may be integrated with the Tec 40 or Tec 45 courses by your instructor.

Technical Sidemount Scuba Dive Training Gym
Decompression

Decompression

Steve, thank you for the Sidemount PCB Essentials Course in Gozo. I've never spent more money on something better. It was great fun. I enjoyed every second of it. It is amazing to see your passion and experience. Your attention to details is remarkable and you never stop trying to improve. I also enjoyed... Continue reading Steve! I thoroughly enjoyed your Sidemount PCB Essentials Course in Gozo. I've never spent more money on anything. It was great fun. I loved every second of it. It is amazing to see your passion and experience. You are meticulous and pay attention to every detail. I love your passion to capture details, new equipment and hints. You can use the camera to capture them and include them in future videos. I have to say that your online training videos are exceptional. They will get you prepared for what you will need during in-water training. This concept I believe is key to the steep learning curve, as you can make the most of your time underwater. Steve, thanks so much! Nils read more

Yes Sidemount PCB started with the Cave diver, but you do not have to be a tech or cave diver to be able to dive on Sidemount PCB. PADI has a Side mount course in which you only carry one cylinder/tank on one of your sides instead of your back.

Technical Sidemount Scuba Dive Training Handbook

I just have this enlightening experience with your online course. I had few experiences with other instructors in my scuba 'career', but I can honestly say that I never saw such a useful, deep, and practical explanations about how to become a better scuba diver. When I did my PADI AOW training, I was struggling with buoyancy control as I tried to shoot my SMB.... read moreI just have this enlightening experience with your online course. I had few experiences with other instructors in my scuba 'career', but I can honestly say that I never saw such a useful, deep, and practical explanations about how to become a better scuba diver. When I did my PADI AOW training, I was struggling with buoyancy control as I tried to shoot my SMB. I asked my instructor how to improve my buoyancy. He said just practice. He had a good buoyancy control surely, but didn't explain to me about the importance of proper weighting, breath control, etc. Your videos were eye opener. Not to mention that every one of my dive buddy didn't really understand why I wanted to dive sidemount. Even now highly recommended instructors ask me why I dive sm. What is the use of it? Mostly cave divers do it. I am very happy that I did choose sm. It is a different world. Nobody really taught me or checked how I do SM, but many times I dive with others, they mention how good my trim is. I learned everything from your videos, how to setup my equipment, enter or exit water, or solve problems, etc. I hope we can meet sometimes and can have a training together, because I want to improve and help others to become much better, quality divers. I am sure that there many excellent divers and instructors out there, but I am sure that your contribution to the scuba diving society is huge and very important. Thank you for that! Regards, Csaba read less

You should know what you are getting. Prices include instruction fees and eLearning fees. Keep in mind that eLearning can cost anywhere from $140 up to $280. If you pay for elearning separately, then a course costing $640 from us could be the same price as a course costing $500 from another source.

Technical Sidemount Scuba Dive Training Group Llc
Technical Sidemount Scuba Dive Training Group Llc

Sidemount PCB Diving evolved in the early years of cave diving, pioneered by explorers such as Lamar Hires to use multiple tanks in a streamlined a compact fashion to get places that back mounted divers could not. As time went on, the technique has matured and evolved to become one of the fastest growing areas of our sport.

New to diving? Looking for the best instruction to take you to new limits? We provide Recreational, Technical, and Sidemount PCB courses. Our specialty is creating a SOLID foundation, regardless of your current certification.

Technical Sidemount Scuba Dive Training 9/11

Sidemount PCB Diving Courses are a useful stand-alone course for the technical diver who wants to become more skilled and proficient with different gear configurations regardless of if he intends to use sidemount all the time. The course may also be taught in conjunction with any of TDI’s other open-circuit specialty courses, on the condition that all prerequisites and standards applicable to both courses are fully met.

The course will require the same equipment, as you will need it for your technical diving and cave training. This includes:

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.