Technical Sidemount Scuba Dive Training Plan

Sidemount Essentials Course

I'm sure you get this all of the time, but I really do appreciate your online videos. I have used them to get my sidemount set up much better, and as an instructor, I have also been able to diagnose student issues and remedy them much more quickly. So, I want to thank you very much for that

Thanks so much to you Steve, and to Vas for your mentoring. Not asking questions and exploring options, tends to put a stop to the progression of safety and growth in diving. I have studied in depth your online teachings for 2 years now and counting. I have practiced and trained muscle memory but most importantly never kept my mouth shut if other divers ask... read moreThanks so much to you Steve, and to Vas for your mentoring. Not asking questions and exploring options, tends to put a stop to the progression of safety and growth in diving. I have studied in depth your online teachings for 2 years now and counting. I have practiced and trained muscle memory but most importantly never kept my mouth shut if other divers ask me. The results are incredible as they now see a better way. I must also say that in my 2 years of learning, you were always kind enough to explain, or give me an idea for improvement!!! There is always an opportunity to ask, learn, teach, discuss, and grow. In diving there should be no stupid questions. I’m sure I will open my mouth in future to ask another question!! Lol

Blue Label Diving proudly offers Sidemount PCB Diving Classes from SSI through TDI in Phuket Thailand. From recreational sidemount diving with two tanks to technical sidemounting for overhead environments in high-end settings, up to instructor level. There is one problem: once you are able to sidemount, you may never be able to go back to backmount dives.

Thank you for this wonderful online course. I have had only a handful of experiences with other instructors in my diving 'career'. However, I can honestly state that I have never seen such an informative, detailed and practical explanation about how to become better scuba divers. As I was trying to get my SMB .... photo, my buoyancy control was very poor. This is why I found your online course so helpful. I had only a handful of experiences with other instructors over my scuba diving 'career'. However, I can honestly state that I have never received such practical, useful, and thorough explanations about how I could become a better scuba diver. I had difficulty controlling my buoyancy when I tried to shoot the SMB. My instructor advised me on how to increase my buoyancy. He simply suggested practicing. He seemed to have good buoyancy control. However, he didn’t explain how weighting and breathing are important. Your videos were very eye-opening. And, of course, every single one of my dive buddies didn’t understand why I wanted the sidemount. Even though I am a highly recommended instructor, they still question me about why I would dive sm. What is its purpose? Most cave divers use it. I am glad I chose to sm. It's an entirely new world. It is a different world. Although no one really taught or tested me on SM, there are many times that I dive with friends and they compliment my trim. Your videos helped me learn everything. I learned how to set up my equipment, enter and exit water, and solve any problems. I hope that we can meet and do a training together. I want other divers to improve their skills and be more competent. I'm sure there are many other excellent instructors and divers, but I believe that your contribution is vital and essential to the success of the scuba diving profession. I appreciate your kindness! Regards, Csaba read less

Technical Sidemount Scuba Dive Training Plan

Sidemount S Drill

AQUI Water Sports is a leader in scuba diving training for multiple agencies under the Recreational Scuba Training Council (RSTC). We have created a global community for like-minded divers and educators who believe in quality over quantity. Don’t be just a number on a certification card, be a teammate, a friend, and a lifelong diver.

Sidemount PCB divers are increasingly becoming popular among technical divers. This is a great option for recreational and technical decompression diving.

Sidemount S Drill
Technical Sidemount Scuba Dive Training Exercises

Technical Sidemount Scuba Dive Training Exercises

I just wanted to tell you that your online training has been outstanding. Every time I log on, I learn something. Your website is amazing in terms of the value it provides. We are grateful for your time.

Steve/Vas Your instructor series is incredible. Let me be the one to confirm what you said. It is easy to learn SM from watching videos like I have. However, I did have to sacrifice my learning curve in order to avoid having to rely on SM essentials instructors. To become proficient in AL80s took almost a full year. I then... Read moreSteve/Vas your instructor series was phenomenal. Let me be the one to confirm what you said. Watching videos like mine can help you learn SM. I did have to sacrifice my learning curve and compromise without a SM essentials instructor. I took almost a full year to become proficient with AL80s. After that, I took my first level in tech diving and informed my instructor that I was learning it in SM mode. He responded by saying that I learned the technique myself. Depending on how I did on dive 1, he may have to teach me SM workshops. After the first dive, he stated that "there's no reason for you not to take a course with me". Your online training was spot-on, but if I could do it over again, Joe Seda would be my first choice. I'm going to take the course with Joe Seda in the near future. Regards Tony read less

Technical Sidemount Scuba Dive Training Quizlet

Steve, just wanted to thank you for your incredible online Sidemount PCB course. I did my PADI Sidemount PCB training last year but always felt like my XDeep harness setup wasn't streamlined where I wanted it. The instructor was good, but I could tell he did not live and breathe sidemount. At the time I had signed up with your free course system which was helpful but... read moreSteve, just wanted to thank you for your incredible online Sidemount PCB course. I did my PADI Sidemount PCB training last year but always felt like my XDeep harness setup wasn't streamlined where I wanted it. The instructor was good, but I could tell he did not live and breathe sidemount. At the time I had signed up with your free course system which was helpful but obviously left you wanting more. I am doing my Overhead Environment training this November in Florida and wanted to make sure my skills and setup were up to speed. After watching your entire online course (WOW). I decided to rebuild my XDeep harness setup using all your recommendations. I re-did my entire bungee system, my attachment points, wing, etc... all using your setup. I finally feel my setup is where it needs to be, and I felt very comfortable in the water. So again, thank you. Next is working on all my skills which are much easier to work on now that my harness is setup correctly. Wish I spent the money on your training a year ago. Take care and please keep the updates coming. Thanks, Jason read less

Technical diving will reveal that divers often have more than one tank. Sidemount PCB allows you to use multiple cylinders in technical diving. With the Tec Sidemount PCB Diver course, you can get into tec diving and transfer what you have learned to other TecRec courses. You may have the opportunity to combine this course with the Tec 40 and Tec 45 courses.

Technical Sidemount Scuba Dive Training Zipline
Technical Sidemount Scuba Dive Training Zipline

Sidemount PCB Diving was developed in the early days of cave diving. It was pioneered in this way by Lamar Hires, who used multiple tanks in a compact and streamlined manner to reach places back mounted divers couldn't. The technique has grown to be one of the most popular in our sport.

Sidemount PCB Staging: This is where the diver puts in cylinders with tanks straps, clips, bungee, and special valves (left or right-handed). Sidemount configuration refers to the use of sidemount configurations (bungee loops or buttplate rails), which allows the diver to store stage/deco cylinders against the sides of his/her torso.

How long can you use a rebreather

Steve, Your Sidemount PCB Essentials class in Gozo was a great experience! I doubt that I will ever spend more money on something else. It was so much fun. Your passion and knowledge are truly amazing. You pay attention even to the smallest details, and you always strive to improve them. I love your passion for capturing... moreHi Steve! I thoroughly enjoyed your Sidemount PCB Essentials Course in Gozo! I've never spent more money on anything. It was so much fun. It's amazing to see the dedication and your experience. You pay attention even to the smallest details, and are constantly striving for improvement. I love your passion for capturing all the details, new equipment, and tips. You will be able include them in future videos. Your online training videos, I have to say they are exceptional. They prepare you for all the necessary information during in-water training. And I think this is what makes the steep learning curve so manageable underwater. Steve, I am so grateful for your efforts! Nils, cheers!

The SDI Sidemount PCB Diver certification can be used to earn a single specialty rating for the SDI Advanced Diver Development Program.

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.