Technical Sidemount Scuba Dive Training Reviews

How many technical divers are there

Items such as cylinders and primary lights, which my be difficult to travel with, are available for rental. Be sure to alert us if you will need any of these.

International Training is the parent company of Technical Diving International. Both courses have a lot in common. Both courses use identical learning materials (which we also wrote). So, what is the difference?

Technical Sidemount Scuba Dive Training Reviews

Technical Sidemount Scuba Dive Training Tips —

This course will teach you how to set up and operate the equipment that you will use in your training as a cave diver or tech diver. This includes:

TDI Intro to Technical DivingThe TDI Intro to Tech Course is an introductory course that expands on recreational training by improving dive planning methods, in-water skills, and streamlining existing gear configurations in a controlled and fun learning environment. This course is excellent for those beggining their journey into the exacting world...

How long can you dive on rebreather

Sidemount has never been something I tried before. However, from watching his online video training, it became clear that Steve was the ideal man to show me how and give me confidence about sidemount. It was an amazing experience, and I didn't regret it! It was truly life-altering! Sidemountpcb Essentials exceeded my expectations. Steve is a great teacher, has patience, and... I was absolutely right! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is an excellent teacher. He's patient, hardworking and puts in a lot to every lesson he gives. Everything is planned and done with great attention to detail. It was an unforgettable and enjoyable experience. Sidemount PCB Essentials Course completely transformed my diving. In such a short amount of time, my awareness level and skills were higher than I could have ever imagined. Everything is in place, including the harness setup, the weight amount, position, the cylinder trim, as well as your balance in and out of water. This will make you feel calm, confident, and allow you to experience sidemount setups that are truly comfortable. The course was difficult but enjoyable. Every day started with a planning session. Each day ends with a video review and discussion about the drills we performed in the water. The learning curve is high because we had a tendency to drain our cylinders whenever we were in the water. Everything was done in a relaxed atmosphere, with great professionalism. Steve will make this course easy for you. Steve will help to make you a better diver! read less

Hi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also love your enthusiasm to capture... read moreHi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also love your enthusiasm to capture all those details, new equipment, new methods, hints etc. with the camera to be able to include them in upcoming videos to the benefit of everyone. Speaking of your online training videos I must say that they are a class of its own. They definitely get you well-prepared for the things you need to know during the in-water training and I think that exactly this concept is the key to the steep learning curve because the time underwater can be used efficiently. Thank you so much for everything Steve! Cheers, Nils read less

How long can you dive on rebreather
Technical Sidemount Scuba Dive Training West Coast

Technical Sidemount Scuba Dive Training West Coast

This course (Intro to Tech) introduces recreational divers to the rigors and discipline of technical diving, and is a great preparatory course if you are considering specific technical diver training, such as cave or decompression diving, or are interested in streamlining your equipment configuration for maximum efficiency. Learn about dive planning, physics and physiology, decompression, decompression associated with technical diving, buoyancy control, and side-mount configuration. The NAUI Technical Equipment Configuration (NTEC) training is also part of the NAUI Intro to Tech course.

Although I have never attempted sidemount, after studying his online training I was certain that Steve is the right man to guide me and make sure I succeed. I was right! It was truly a life-changing week! I was beyond thrilled with the sidemountpcb Essentials program. Steve is an excellent teacher, has a lot patience, and... Read MoreI have never tried sidemount but I learned from his online video that Steve was the ideal man to teach and feel confident about it. I was correct! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He is patient and gives his time and effort to all of his students. Every step is carefully planned. It was memorable and rewarding. Sidemount PCB Essentials Course has changed the way I dive. My diving skills and awareness were elevated in a way I didn't expect. Everything is in place: the harness, weight and position, the trim of the cylinder, and your overall balance in the water. This allows you to feel confident, relaxed and has no back pain. Although the course was quite challenging, it was extremely enjoyable. Every day began with a planning session, followed by a video review on our drills in the sea. Every time we got in the water, we had to drain our cylinders. That's why our learning curve was so steep! All of it was done with exceptional professionalism in a safe and relaxed atmosphere. Steve is a great instructor and I recommend this course. Steve will guide you to greatness if you are passionate about Sidemount PCB. read less

Training

Steve and I first met 10 years back when he traveled to Portugal to train our staff in Sidemount PCB. (At the time, it was still the beginning of Sidemount PCB). I could instantly see his passion, technical ability, professionalism. The website and online learning have made this possible. These contents can be used by anyone, starting from someone... continue reading. Steve first came to Portugal 10 years ago to train our staff in Sidemount PCB (at that time it wasn't the beginning of Sidemount PCB). I immediately noticed his passion, technical proficiency, and professionalism. The website and online courses have made this a new experience. You can find everything you need, whether you're a beginner, an instructor or an expert. Sidemount is now an easy way to learn how to dive. read less

Steve, thanks for the section on the online course. I found that I learned more online then I had expected. Your videos are very well made and help me to grasp a lot more quickly than I could from books or other materials. I intend to recite the most important lessons before going on the water course. Regards Rafal

Certified Diver
Certified Diver

Sidemount diving is allowed after successful completion of the course. This is subject to the following restrictions:

Steve/Vas your instructor series are amazing. I will be the first to admit that you are right in everything you have said. Watching the videos can help anyone learn SM. I had to sacrifice my learning curve and compromise without a SM essentials instructor. It took me almost a year to become proficient with AL80s. I was then able to... read mehrSteve/Vas. Your series of instructors is simply amazing. I am sure you are right. Watching the videos can help anyone learn SM. Without you, my learning curve was compromised/sacrificed. It took me almost a year to become proficient in AL80s. My tech instructor told me that I was doing tech diving in SM configuration. I had to admit that I was a certified instructor. He replied by saying "You most likely will have a SM workshop with us depending on my performance on dive one". After my first dive, he told me that there was no reason not to take a class. Although your online training is great, I would still go to Joe Seda for the class if it were over. I will take his course in the future so that I can be my best. Regards Tony read less

What is the deepest you can go on nitrox

Your online training is excellent. Every time I log into my account, I learn something new. Your site is full of incredible value. It's even more amazing that you engage with your subscribers. We appreciate your time.

I have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The sidemountpcb Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and... read moreI have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The Sidemount PCB Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and puts a lot of time and effort in everything he does with his students. Everything is planned and worked with great detail. I found it a memorable and a rewarding experience. The Sidemount PCB Essentials Course transformed my diving. My awareness and skills level under water raised where I never expected in such a short period of time. Everything is in the right place... the harness set up, the weight amount and position, the cylinder trim and your balance in the water. This makes you feel very relaxed, confident and experience the true sidemount set up... and no back pain!!! ?? The course was very demanding yet very enjoyable. Every day starts with a theoretical and planning session and ends with a video review about our drills in the water where everything is discussed in great detail. We drained our cylinders every time we went into the water and that's why our learning curve is so high! Everything was done in a relaxed and secure atmosphere yet with extraordinary professionalism. Don't think twice about taking this course with Steve. If you are truly engaged in Sidemount PCB and want to be a great diver, Steve will help you to achieve more than you ever expected! read less

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.