Technical Sidemount Scuba Dive Training Jobs

You will learn the benefits of using a sidemount configuration for diving as well as how to set up a sidemount harness. Practical training will take place in one confined-water session and four open-water dives. You'll be diving with at least two tanks. Then, you can add at most two more tanks.

Stage-only diving is the use of standard deco/stage cylinder configuration, without back-mounted cylinders, on an otherwise standard, or partly modified tec/rec BCD. The lower cylinder is attached to waist D-Rings and the upper cylinder to shoulder D-Rings, both via direct bolt-snap. Some divers (untrained in specific sidemount diving techniques) often incorrectly assume this approach to be sidemount diving. No bungee cord is utilised in the upper attachment, causing the cylinders to hang low beneath the diver and not in line (parallel) with their torso beneath their armpits. Without change of the BCD design, the lack of back-mounted cylinders also causes taco’ing of wing designs and much instability.

One of the most important changes in equipment cave divers have made since the start of the century was the switch from sidemount to backmounted doubles. Sidemount is a popular choice for cave divers. It's also possible that sidemount cave divers are more common than backmount cave divers.

Steve, thank you so much for your mentorship. The lack of asking questions and exploring all options can prevent you from progressing in safety and learning more about diving. I have been studying in depth your online trainings for two years and counting. I have trained and practiced muscle memory, but most importantly, I never kept my mouth shut when other divers asked... read onThanks Steve and Vas for your mentoring. The lack of asking questions and exploring all options can stop you from progressing in safety and learning more about diving. I have studied your online courses for two years and counting. I have trained and practiced muscle memory, but more importantly, I have never been afraid to tell others if they ask. It is amazing how they see the world in a better light. I want to mention that during my 2 years of training, you were always kind enough and willing to answer any questions or offer suggestions for improvement. You have the opportunity to ask questions, share your knowledge, teach others, and learn. No stupid questions are acceptable in diving. I'm certain I will ask another question in the future! Lol

Steve/Vas, Your instructor series has been amazing. Please allow me to be the first person to state that I agree with everything you said. One can learn SM simply by watching the videos. I was able to sacrifice my learning without the help of SM Essentials Instructor. It took me nearly one year to get good at AL80s. I then read moreSteve/Vas. The instructor series you have created is truly amazing. Let me just say that I agree with everything you have to say. As I have shown, anyone can learn SM from watching videos. I was able to sacrifice my learning curve, but not without the help of SM essentials instructor. It took me almost one full year to get used to AL80s. I completed the tech dive level one year later and informed my tech instructor that I was diving in SM configuration. I had to explain to him that I taught it myself. His response was "you most likely need to take a SM class with me depending upon how I do on dive 1". After my first dive he said, "There is no reason why you should take a class alongside me." Your online training is perfect, but I would go back to Joe Seda if I had to. I plan to continue the course with him in the future. Regards Tony read less

The goal of this course is to teach you the basics of how to use the equipment in your cave or tech diver training. You will also need the same equipment for the course. This includes: