Beam Layout Welding Attachment

Beam Layout Welding Llc







Beam Layout Welding allows you to join different web sections with a 100% welded seam. It can also be used to create long webs out of short sections or join sections of different thickness. The two pieces to join are aligned against an edges guide and held in place by air cylinders. The copper backing-up plate with grooves is used to seal the joint. The welding head is positioned along the joint to weld it using a single wire submerged arc.




The TS-72 tack-up station offers hydraulic clamping which pre-fixes the leading edge of the prefabricated beans. Franklin 40 Series CNC Gantry allows for automated pick-and-place loading of finished Flanges using the Franklin CNC Falange Line System. Franklin "60" Series Gantries offer up to 60 feet of length and 75 feet of travel storage.

Beam Layout Welded Optimization Problem




Welding arm, which is the main part of welding work, can move horizontally along cross beam, together with tool carriage. Also, it can move up or down using the directional wheels on the tool carriage. It is mounted under the welding beam. Seam tracking device has the function of automatic track, which can maintain a suitable distance between welding gun & welding seam. Also, it has an auto compensation function for Hbeam deformation.

Beam Layout Welded Optimization Problem
What are the welding requirements of structural fabrication

What are the welding requirements of structural fabrication




This wire feeding device can connect wire feeder and reel together using wire feeding pipes. Wire reel supporter can be used to fix wire reel. Before welding, insert wire reel into supporter and then feed wire thrill through feeding tube.

Plate Girder Weld Design



Each section can carry approximately 4,000 pounds of load. To reduce friction between the turning beam and the slower moving beam at the welder's entrance, conveyor speeds can be synchronized with the input speed of the welder.

Beam Layout Welding 12 Gauge

Beam Layout Welding 12 Gauge




The application of beam layout welding and H-beams is very different. However, it's not restricted to what it can be used for. These are just a few factors that can help you tell if an H beam is an I beam.

Narrow Weld


Since 1992, Gulf States Saw & Machine Co., Inc. provides professional fabrication equipment to professional fabricators. Our headquarters is located in Hueytown (Alabama), where we are able to serve all ten states. Gulf States Saw & Machine Co., Inc., which was established in 1979, is our sister company. We are family-owned and operated.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.