Gulf States Saw & Machine Company, the largest distributor of metal fabrication & robotic welding in the South. Since over 30 years, we have been committed to providing the best technology and top-quality service.


An H beam's flanges are usually thicker than the normal, so they can be used in applications that need to support heavier and larger weights. The flanges on I beams are also inclined, which is why they were labeled as "I" beams. H beams on the other hand have flattened, leveled Flanges.

Beam Layout Welding Electron


The flanges will be welded onto the center-web by welding the heads of the side fuse as it rolls in a certain direction. Double-joined flanges make it easier to attach the web to the web.

Beam Layout Welding Electron
Beam Layout Welding For Dummies Pdf

Beam Layout Welding For Dummies Pdf



The two flanges, which are located on the conveyor section opposite each other of the web's web, are rotated into vertical position by magnetic guide rollings. The three pieces can be moved to the right position by a hydraulic clamp. The operator manually joins them. The clamps can be released and the tack welded beam is sent to the welding station. After the initial adjustment of the clamp positions in the first beam beam, the operator controls all material movement through the control panel.

Laser Welding Machine


It's designed to bend, compress and contract at the top while being tensed at its bottom. This means that you can find many different uses for it. These are just some of many reasons to use I beams. There are other reasons, too, like its flexibility.

Beam Layout Welding Working Principle

Beam Layout Welding Working Principle


Gulf States Saw & Machine Company can also fulfill Machine Parts orders. All you need is a simple form. You will receive a Parts Representative shortly!

Why do welders drink milk




Think again if you believed that an I beam was the same as an h beam. It's all explained below. For a better understanding of the importance and benefits of I beams imagine a single plywood piece. Place the plywood just beyond the edge, so its longitudinal ends don't touch.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.