Beam Layout Welding Introduction

Beam Layout Welding Aluminum


Pre-Engineered Buildings is a shorthand for Pre-Engineered Buildings. This basically means that parts of the machine have been built and manufactured before they are assembled. Many people mistakenly believe that an H beam looks the same as an I beam. They are very different in reality!


The two flanges will be placed on the conveyor section at opposite ends of web. The three pieces are positioned against a retractable stopping device and hydraulically clamped to their respective positions. The operator manually tack-welds them together. The clamps are released and the tack-welded beam can be sent to the welder. After setting up the clamp positions on the first beam, an operator controls material movement via the control panel. This is the same procedure for all subsequent beams.

Beam Layout Welding School


The tacking fixture allows you to attach the beam to the Main Welder. The web and flanges can be brought from the seam-welder and flange storage shelves respectively. Once they are there, they are positioned at the tacking fixture before being tacked to the beam's leading edge. Operators or automatic PHI's flange loading Gantry can load the flanges onto the conveyors manually.

Beam Layout Welding School
Do steels need to be bolted together

Do steels need to be bolted together



Gulf States Saw & Machine Company has the largest distribution network of Metal Fabrication & Robotic Welding products in the South. Over 30 years of experience in providing high-quality services and the most advanced technology to our customers.

Beam Layout Welding Vest






An arc-guiding device fixes wire feeding device. This device connects wire feeder and wire reel together via wire feeding pipe. Wire reel supporter is for fixing wire reel. Place wire reel into the supporter prior to welding. Then, feed wire thrill through the feeding tube and connect it back to the machine.

Beam Layout Welding Titanium

Beam Layout Welding Titanium



Beam Layout Welding program can be downloaded remotely over a network or connected PC. The software also comes with a 1-day data logger, which keeps track of the machine's operation. This option allows beams to be manufactured up to 84" instead of 72". All parts of the system have been modified to accommodate larger web sizes.

Beam Layout Welding Radiation Exposure


H Beam layout welding equipment is more than a one-off piece. It is composed of many different parts with different functionalities and features. Beam layout machine manufacturers and suppliers use many different materials to produce their H beams. H beam welding machine are made mostly from different types of metal.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.