Beam Layout Welding Extension

What is the best welding method?


You may be wrong if you think an H beam and an I beam are the same thing. Below, we'll explain it better. Imagine a single piece plywood to understand the importance I beams. Place the plywood so that its longitudinal ends only support at the edge.






Although actual production capacity depends on the size of the beams to be made, the typical output is approximately 2,000 tons per month and only three workers work an eight-hour shift.

Working Principle



Beam Layout Welding applications can be downloaded remotely using a connected computer or network. You will also find a one-day data log to keep track of machine operation. This option allows you to make beams larger than the standard 72" in size. All components of the system can be modified for larger web sizes.

Working Principle
Gas Tungsten Arc Welding (Gtaw)

Gas Tungsten Arc Welding (Gtaw)




To dispense and recover welding flux, a flux recovery system can be used. Seam Welder Hydraulic Power Units and Electric Controls are used to drive conveyors at the Seam Welder's entrance and exit.

Beam Layout Welding For Dummies


Each conveyor section has a load capacity of approximately 4,000 lbs. To minimize friction between the turning roller at the welder entry and the slower-moving beam at its entrance, conveyor speeds are synchronized to welder input speeds.

Large Volume Production

Large Volume Production


Beam Layout Welding can be downloaded remotely from any connected PC or network. It includes a one day data logger to record the machine's operations. This option allows for beams of maximum size 84" rather than the standard 72". All elements are modified to accommodate larger web size.

Photon


Most people think H beams, and I beams, are the same. They are not. They might have the same purpose and structure, but they are different things! Here are some differences you need to be aware of:

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.