Operator uses the "IN conveyor to bring the beam to the desired starting position. He then selects one of the preset programs (welding rate, wire speed and voltage) and pushes "START". The complete sequence of operations including positioning and movement of the welding heads, start/stop of the welding process on stationary or moveable sides, activation and stop of copper back-up assembly and pressure cylinders, as well as the total sequence of operations, will be performed automatically.
Gulf States Saw & Machine Co., Inc. has been providing professional fabrication equipment to professional fabricators since 1992. The nerve center of our operations is in Hueytown, Alabama, where we can serve our ten-state region effortlessly. Gulf States Saw & Machine Co., Inc. is the sister company to Alabama Tool & Supply Co., Inc. which was founded in 1979. We are a family owned and operated business.
The clamps are released and the web is transferred to the tacking fixture. The welding equipment includes a flux hopper, travel carriage and controls. It also has a 1,000 Amp power supply. Full-color laser projectors will show all information needed to accurately tack-weld connections onto the beam or other connections.
Beam Layout Welding can be used to join web sections using a 100% welded seam, to make long webs from shorter sections, or to join sections with different thicknesses. The pieces are placed against an edge guide, and then clamped together using air cylinders. The joint's lower side is held in place by the grooved copper backup plate. The welding head moves along the joint and weaves it using a single-wire submerged arc.
A typical Beam Layout welding system comprises 18 conveyor sections. Six of them are motorized, driving the rollers through sprockets as well as chains. Ten of them are connected via chains to motorized sections adjacent. Two are inactive.
Gulf States Saw & Machinery Co. Beam layout welders and suppliers make different sizes. The size of the client will also play a role. Funding an I beam welder manufacturer or supplier is the best option. You'll not only get the lowest prices but also receive assistance with installation.
The Beam Layout Welding's Electrical Control Panel allows for maximum system control flexibility. You can operate the Welder in Manual Mode or Automatic Mode. The individual controls on the control panel allow you to set the order of operations in Manual Mode. Each welding head controller can also be used to set the welding parameters.
A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.