Beam Layout Welding Cap

Beam Layout Welding Eb


Beam Layout Welding can be used to join web sections using a 100% welded seam, to make long webs from shorter sections, or to join sections with different thicknesses. The pieces are placed against an edge guide, and then clamped together using air cylinders. The joint's lower side is held in place by the grooved copper backup plate. The welding head moves along the joint and weaves it using a single-wire submerged arc.




A typical Beam Layout welding system comprises 18 conveyor sections. Six of them are motorized, driving the rollers through sprockets as well as chains. Ten of them are connected via chains to motorized sections adjacent. Two are inactive.

Laser





The Beam Layout Welding's Electrical Control Panel allows for maximum system control flexibility. You can operate the Welder in Manual Mode or Automatic Mode. The individual controls on the control panel allow you to set the order of operations in Manual Mode. Each welding head controller can also be used to set the welding parameters.

Laser
Beam Layout Welding Valve

Beam Layout Welding Valve


Traditional fitting requires that a qualified fitter reads and understands the assembly drawing and then pulls out the measuring tape to mark the beam. Laser projection systems project detailed information directly onto the beam. This allows an operator with limited training to align the connection with the line and tack-weld as needed.

Beam Layout Welding Machines


The clamps are released and the web is transferred to the tacking fixture. The welding equipment includes a flux hopper, travel carriage and controls. It also has a 1,000 Amp power supply. Full-color laser projectors will show all information needed to accurately tack-weld connections onto the beam or other connections.

What does ASME stand for in welding

What does ASME stand for in welding


There will always be H beam welding machines on the market, especially when you consider that there are more manufacturers! Gulf States Saw & Machinery Co is the only manufacturer you can trust. We have been in the industry over a decade and have had nothing but happy clients.

What is fabricated beam










Gulf States Saw & Machine Co., Inc. has been providing professional fabrication equipment to professional fabricators since 1992. The nerve center of our operations is in Hueytown, Alabama, where we can serve our ten-state region effortlessly. Gulf States Saw & Machine Co., Inc. is the sister company to Alabama Tool & Supply Co., Inc. which was founded in 1979. We are a family owned and operated business.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.