How To Become A Scuba Diver Instructor

How To Become A Sidemount Technical Scuba Diver Go

Depending on the environment and type of diving each configuration has its advantage and disadvantage. Diving in caves or wrecks the preferred way to dive for sure is either Sidemount or rebreathers. There is also an option for a Sidemount rebreather which makes the diver more streamlined to fit through narrow restrictions. Sidemount also gives the diver the advantage to leave tanks behind that will be picked up upon exiting the cave or wreck. To fit through narrow bedding planes unclipping the tanks makes the profile of the diver even smaller and places that are not available to a backmounted twinset diver become accessible.

SDI/TDIIncludes Two Open Water DivingsMinimum Age 18 Years, Minimum 15 Years with Parental Consent.

Becoming a technical diver is equal parts training, experience and passion. If any of the three are lacking the added risks in technical diving aren’t worth it.

All Tec diving (open circuit and closed circuit rebreather), as well technical scuba diving courses, are taught at Scotty’s dive centre headquarters facility. It is located in Mactan in Cebu province. You are welcome to walk in or have us pick you up from your hotel if you are not a Shangrila guest.

How To Become A Scuba Diver Instructor

Steps To Become A Scuba Instructor

If you're a Tec diver and want to do sidemount diving, it's important to know how to set up your new rig, adjust it, enter the water with it, and much more.

Our CDS Basics Orientation course is the best option if you don't plan to use sidemount while you cave diver training.

Steps To Become A Scuba Instructor
How To Become A Sidemount Technical Scuba Diver Supervisor

How To Become A Sidemount Technical Scuba Diver Supervisor

Sidemount is not something you'll be doing during cave diving training. Instead, you should look at our CDS Basics Orientation Course.

Whatever configuration a diver chooses there is benefits for each and in different situations each configuration has its up or downside.

How To Become A Sidemount Technical Scuba Diver 200 Feet

Don't wait! Find a TDI instructor near you today: https://www.tdisdi.com/search/?area=instructors

Because single orifice duals and backmounted independencies are less common today, backmounted doubles became popular. Independents have two cylinders strapped to the back of one another with independent regulators. If the 1st stage failed, the diver would only need one cylinder. Single orifice twos were two cylinders that were connected with a regulator and a valve. A failure on the first stage would result in gas loss. Both problems are solved by the isolation manifold doubles that are used today. Each cylinder may be used independently. But, divers can also use the same regulator to breathe gas from both. These doubles are often held together by metal bands. If necessary, the valves can be connected to an isolation manifold. Backmounted doubles diving has a similar profile to regular single-cylinder dives. However, the profile is vertically identical.

Nitrox Diver
Nitrox Diver

Sidemount regulators are also covered. You'll usually find one regulator on long hoses and one on shorter hoses with a necklace. Sidemount regs can be marked to distinguish the tank from which you are inhaling, unlike regular regs. This was a swivel-joint that I used to control my short hose regulator during my training. Additionally, you will receive two SPGs for each stage.

Sidemount divers typically use two tanks, but you can use just one tank (I was taught it's called "monkey") or more than two tanks to do deco dives.

Skills

It was difficult to get into the pool for my first session. I felt like an open water diver, securing myself in twin tanks and conducting valve drills. As we went through the Tec 40, 45, and 50 courses, I found new skills and was enjoying the course. The best part about Tec diving is the ability to improve your buoyancy, awareness and dive skills. It's quite an experience to know that you can manage life-threatening emergencies at depth without having to go to the surface due to decompression requirements. It's also satisfying to execute your dive plan with military precision.

Know what you're getting. Prices include instruction, eLearning fees and other costs. You should also consider that eLearning costs can vary from $140 to $280. In other words, a course that costs $640 may cost as much as a $500 course you purchase from us if you are required to pay for the elearning separately.

Check our other pages :

Frequently Asked Questions

Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
 

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).