If you're not ready to try diving locally, but want to support your local dive shop, you can complete eLearning and coursework near home, then complete your training dives while traveling. Contact your local PADI Dive Center to ask about a referral.
Sidemount and technical sidemount were my first courses. Sidemount diving is, as its name implies, where you place your tank in front of you. By the end of the session, my hands were covered with cuts. You can remove the tanks from their clips and place them in front of yourself, Superman-style, to streamline your life. The afternoon dive went much smoother after some adjustments to the harness. I was now comfortable unclipping the harness and 'Superman-ing" with the tanks. Sidemount is a great way to have more freedom than having two people on your back. Matt created obstacle courses, and soon we were flying around them with tanks at our fronts, barrel-rolling, and swimming upside down.
A Twinset diver will always be able to access to both tanks from one single regulator as long as the manifold, or the connection between both tanks is open. To carry a twinset for a smaller person might be a challenge on land. It is quite heavy and sidemounted tanks can be carried individually which sometimes makes it easier to access remote areas or steep slopes to access the water.
If you want some diving classes alternative and lessons or want to know what's best next for your education, take a look at the three options below.
Sidemount diving was originally developed in cave diving. However, it has now made its way into recreational non-overhead diving. Simply put, sidemount diving means that you no longer wear one or two tanks on your back. Instead, you wear your tanks on either your side. The tanks can be attached to a Sidemount BCD with clips and/orbungee cords. This gives you great flexibility. Cave divers were able to use this flexibility to allow them to transport their tanks underwater and fit into tight spaces.
Every PADI Specialty completed will get you one step closer towards the Master Scuba Diver(tm).
How To Become A Sidemount Technical Scuba Diver Personnel
One of the big risks for a technical diver is decompression sickness. It occurs when nitrogen gas cannot exit the body thru respiration on ascent as the ambient pressure decreases. Therefore stops have to be executed on ascent in order to avoid a pressure difference too big so nitrogen bubbles can be formed. Buoyancy control is very important to control the stops on ascent and increase efficiency for off-gassing of nitrogen. Another important skill is proper breathing which makes metabolism efficient. Trim, which we call a proper tech diving position such as horizontal with a slight arch in the back, looking forward and knees at a 90 degree angle with fins pointing back. Trim prevents stirring up sediments on the bottom as well as most efficient movement in the water. And of course proper finning techniques to avoid overexertion are mandatory to make a diver achieve maximum performance. Now you might say, we want to have fun when we go diving and not be a machine.
Sidemount Diver Specialty courses may count towards Advanced Open Water Diver certification. Ask your instructor.
The next day it was on to technical sidemount, which means adding our deco 50-percent oxygen and 100-percent oxygen tanks on either side. This increases your profile underwater so you must keep the tanks as trim as possible against your body. You have a couple of clips on each side of your waist. As you breathe down your tanks and they become positively buoyant, you adjust your tank position to the second clip position. The aim here is to be as streamlined as possible. Every few minutes you also switch your breathing from one tank to the other. That way the pressure in each tank runs down at roughly the same rate, and if there is a failure with either tank or regulator, you’ll still have gas to breathe. As with all new things, building up experience is key to comfort and enjoyment. I spent the next few days doing deco dives with the sidemount rig, buddied up with Evolution co-owner David Joyce — a hugely experienced Tec diver and Trimix instructor. On one dive we visited the Japanese Mogami wreck down at 164 feet, where I was beguiled by the bits of old gas masks, uniforms and even a few bones we saw.
Take a look at these three options if diving classes and lessons are not what you desire or you need to decide where to go next.
Technical diving is on the rise and Girls That Scuba HQ was quick to notice it! There were many questions to be answered and nerves to overcome so we decided to seek out Theresia, an Asian tech instructor. She is currently working at Blue Marlin Gili T, Lombok. She provided an introduction course in twin sets, and allowed us to dive into technical diving. Here's her lesson:
Rebreathers allow for greater diving ability by eliminating large cylinders. Instead, they recycle the gas exhaled by divers, scrub the CO2 and inject small amounts of gas. This can greatly increase the time it takes to dive, especially if you are doing deeper dives. Rebreathers can either be sidemounted or back, and their profile is determined by the configuration.
Sidemount BCDs are a harness that has a bladder and an intricate system of sliding D rings, bungee cables, and clips. They are important for the tank position and trimming later in the water. Your instructor will likely spend quite some time making sure they fit perfectly.
Although we can teach the SDI course if specifically requested, by default we offer the TDI one. It is possible to take this as a standalone program; however, our students generally combine this with our Apprentice Cave Diver course.
Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.
2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).