How To Become A Sidemount Technical Scuba Diver No Experience

How long is rebreather training

Sidemount Diver is one of the most challenging courses that I have ever completed. It was because Big Blue Tech, my trusted dive shop in Koh Tai, and Fiona my instructor included many more skills and dives to my course than necessary. Although we made sure my task load was manageable, we still practiced skills. These included tank removal underwater, mask removable, out-of air drills, SMB deployment, and many other things while maintaining (or trying to maintain) perfect trim.

Twinsets on the other hand are two tanks attached to the back of the diver and are usually connected with each other thru a manifold. This means a diver can access to both tanks using a single regulator.

You can learn the SSI technical diver course and dive with up to four tanks (cylinders), for extended dives. The technical sidemount diver class is a great way for you to start technical diving. You will learn how to manage multiple cylinders during one dive. Also, learn how to configure your sidemount gear and set up a tec harness.

Cave passage formed over millions of years of water erosion that stretch thousands of feet from the entrance are reserved for those trained in overhead diving. The unique beauty and tranquility that these sites offer is only surpassed by the incredible timescale with which they formed.

How To Become A Sidemount Technical Scuba Diver Master

Sidemount can provide a number of benefits for any diver, but is especially well suited for cave diving. (It was, after all, cave divers who invented sidemount.) Among these benefits:

These cards are only issued to those who have earned them. Participating in a course is not a guarantee of certification. Certification cards may be offered by multiple agencies for cave courses. C-cards cost $30 to $30 per card, depending on the agency. Ask your instructor for more information.

How To Become A Sidemount Technical Scuba Diver No Experience
How To Become A Sidemount Technical Scuba Diver Master
How To Become A Sidemount Technical Scuba Diver Rider

How To Become A Sidemount Technical Scuba Diver Rider

Also, diving sidemount start to be wildly spread across the world even for an open water dive. Why? Because diving sidemount is extremely comfortable and easy to learn.

Technical diving refers to being exposed to a ceiling which prevents divers from reaching the surface at all times. This could be caused either by a physical ceiling such as a cave or wreck or a virtual one created by a dive restriction. If the NDL is exceeded, mandatory decompression stops must be made on ascent to avoid any decompression sickness. Most cases require special equipment, such as Sidemounts or Twinsets. To optimize Nitrogen offgassing, Twinsets or Sidemounts are necessary.

Level

The popularity of sidemount diving continues to grow, even when it is open-water. Why? Sidemount diving is very simple and comfortable.

Sidemount divers tend to use two tanks. You can, however, use just one tank (I believe it's called the'monkey'), or use more than two tanks when doing deco dives.

How To Become A Sidemount Technical Scuba Diver Position
How To Become A Sidemount Technical Scuba Diver Position

You are interested in becoming Sidemount Diver? This article will provide all the information you need about what it takes to become a Sidemount diver.

Despite the gear choice the entry level tech diver will be taught to streamline their equipment to prevent dangling items and drag. This ensures a maximized profile for efficient propulsion and awareness.

Wreck

Sidemount Diver was one of my most challenging courses. This was due to the fact that my instructor Fiona, from Big Blue Tech, a trusted dive center in Koh Takao, included more skills and dives than I needed. My task load was always manageable so we practiced skills repeatedly. This included mask removable, tank removable underwater, out of air drills, and SMB deployment. We also kept our trim.

Do not worry about how it all will come together. A large part of the course teaches you how to set up Sidemount equipment and how to adjust bungees to ensure your tanks are in good shape. Your instructor will be there to help you through it all!

Check our other pages :

Frequently Asked Questions

from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.

Technical diving (also known as tec diving or tech diving) is non-professional scuba diving that exceeds the agency-specified limits of recreational diving.

- Increased Bottom Time A Closed Circuit diver is not concerned with running out of gas because they are only limited by decompression. This can also be reduced by selecting an oxygen partial pressure that provides the diver with virtually limitless bottom times in 60 feet or less of water.