Side Mount Dive Training

How To Become A Sidemount Technical Scuba Diver Exam

While most Sidemount divers use two tanks as a standard, you can also just use one tank (I was told it’s called ‘monkey’) or more than two tanks for deco dives.

Technical diving means that a diver is not allowed to reach the surface from any point during the dive. It could be due to a ceiling in the form of a cave/wreck or virtual ceilings created by decompression obligations. To avoid decompression sickness, you must perform mandatory stops on ascent when the NDL's are exceeded. This usually requires the use special equipment like Sidemounts and Twinsets. Twinsets and Sidemounts require special gas mixes, additional training, and twinsets/sidemounts to ensure that you can perform these stops correctly on ascent in order to maximize Nitrogen offgassing.

Divers must maintain a minimum level fitness and health. Some conditions such as chronic illness, recent surgery or medication may make it necessary to obtain written permission before you can dive.

Divers using decompression oxygen mix all types can extend their time looking at wrecks or reefs on the oceanfloor. The sport diver may be limited to two short dives at 100ft. A decompression diver can cruise the seas for 60 minutes or longer, getting more bang for his buck.

How To Become A Scuba Diver Instructor

Technical divers can explore wrecks and reefs down to depths of 40 meters/130 feet. They can dive in underwater caves or other areas that are not accessible to recreational divers.

I took my first sidemount and technical sidesmount courses. Sidemount diving, like the name implies, requires you to place your tank on your hands. My hands and knuckles were completely covered by cuts at the end. The idea behind sidemount diving is to unclip your tanks and then place them in front you, Superman style. This will streamline your workflow. After making some adjustments to my harness size, the afternoon dive went more smoothly. I was now comfortable unclipping my harness and "Superman-ing” with the tanks. Sidemount gives you an amazing level of freedom, even if you have doubles on your back. Matt put up obstacle courses. We were soon flying through them with tanks in front, barrel-rolling, swimming upside down and tanks at the rear.

How To Become A Scuba Diver Instructor
How much does a scuba diving rebreather cost

How much does a scuba diving rebreather cost

Sidemount diving requires only an Open Water Diver to begin. Although it's important to have excellent buoyancy and trim, you should also be able handle your equipment independently. Sidemount diving offers a whole new level of skill and equipment setup.

You don't need to worry about how all this will work. The course includes learning how to set-up your Sidemount equipment, as well as how to measure and adjust clips and bungees so that your tanks are in perfect trim. You will have your instructor to assist you in all aspects.

How To Become A Sidemount Technical Scuba Diver Octopus

Rebreathers can increase your diving skills by using smaller cylinders. This can significantly increase the dive duration, especially when used for deeper dives. Rebreathers can be mounted sideways or back. It all depends on how they are configured.

The SSI technical-sidemount diver course allows you to take extended dives with four+ tanks (cylinders). Technical diving is easy with the technical sidemount course. You can learn to operate multiple cylinders at once. Config your sidemount gear. Learn how to make a tec sidemount harness. Also learn how adjust the sling tanks on your body.

Tech Diving
Tech Diving

International Training, parent organization to Technical Diving International / Scuba Diving International (TDI), and Technical Diving International / Scuba Diving International - offers both TDI and SDI versions of the Sidemount Diver course. Both courses have a lot in common. Both courses use identical learning materials (which we also wrote). So, what is the difference?

We offer the TDI course as an option, although we can also teach the SDI course if asked. This course can be taken on its own, or with the Apprentice Cave Diver course.

How To Become A Sidemount Technical Scuba Diver Job

Sidemount Diver was by far the most challenging course I have ever taken. However, my instructor Fiona at Big Blue Tech (a trusted dive center) and Big Blue Tech (my instructor) included a lot of skills and dives in my course. We made sure to keep my task load manageable and practiced many skills including tank removal underwater, mask and tank replacement, out of the air drills, and many others while trying to stay in top trim.

Mentality: Technical diving is still fun. It's just as much about seeing cool objects, like sport diving. However, technical divers see sights that are longer, deeper, or hidden from sport divers. Technical divers are still a fun and focused group, but they also stay on the right track. There are still plenty of jokes, and there are many laughs. However, dive planning must be executed with seriousness. You are always at risk when you dive, even if you have the right skills and practice.

Side Mount Dive Training
Check our other pages :

Frequently Asked Questions

To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.