How To Become A Sidemount Technical Scuba Diver Driver

How To Become A Sidemount Technical Scuba Diver Drawing

The Sidemount dive setup is slightly different from the backmount, as is the equipment.

You should know what you are getting. Prices include instruction fees and eLearning fees. Keep in mind that eLearning can cost anywhere from $140 up to $280. If you pay for elearning separately, then a course costing $640 from us could be the same price as a course costing $500 from another source.

2nd stage regulator, 2nd stage regulator, exposure suit, BCD sidemount, BCD sidemount and SMB sidemount, cutting tool, diving pool, Jet fins, masks and spare masks, technical diving equipments, technical diving gears, 1 long Hose (2.10m-7ft), cave harness or hogarthian.

The next day, technical sidemount was underway. This meant adding our deco 50 percent oxygen and 100% oxygen tanks on either end. The tanks will make you appear more prominent underwater. Each side of your waist has a few clips. As your tanks become buoyant from the air you exhale, adjust your tank to the second clip. You want to make your life as simple as possible. In a matter of minutes, your breathing is switched between the tanks. You can breathe easily because the pressure in each tanks is equal. Like all new things, experience is crucial to comfort and enjoyment. The following days I spent deco diving with the sidemount rig. My buddy David Joyce, Evolution co-owner and Trimix instructor, was with me. We went to the Japanese Mogami Japanese Mogami shipwreck at 164 feet. There, I was charmed and enthralled by the remnants of gas masks, uniforms, bones, and other old items we saw.

Padi Sidemount Diver

Sidemount diving is a great option, especially for those who are already tec divers. You will need to learn how to adjust your rig, how you can enter the water with it (yes, it is different, but it is more relaxed).

Learn our SSI technical sidemount diver course and get the opportunity to dive with four+ tanks (cylinders) for extended dives. The technical sidemount diver course is an excellent way to get yourself into technical diving as it will train you to handle multiple cylinders on a single dive. Learn also on configuring your sidemount gear and setting up a tec sidemount harness as well as adjusting the sling tanks (cylinders) on your body.

Padi Sidemount Diver
Program

Program

Computer-aided instruction forms an integral part of most courses we teach. The Why? The reason is simple. eLearning helps students get in the water earlier and spend more of their time there. We offer all applicable online eLearning programs at no additional charge. They are typically $140. This can translate into an extra day in-water instruction. That is an incredible value. Priceless.

A minimum of fitness is required for scuba diving. A physician may be required to approve you before diving if you have any chronic conditions, are taking certain medications, or have had recent surgery.

How To Become A Sidemount Technical Scuba Diver Model

To become a technical diver, you need to have passion, experience and training. Technical diving can be dangerous if one or more of these factors is lacking.

What are you waiting for?! Find a TDI instructor near you today: https://www.tdisdi.com/search/?area=instructors

How To Become A Sidemount Technical Scuba Diver Driver
Cam-band
Cam-band

All our Tec diving lessons (open circuit or closed circuit rebreather) and technical scuba diving classes are given at our Scotty's dive center headquarters facility, located in the Shangri-la hotel in Mactan, Cebu province. If you are not a guest of the Shangri-la hotel, you can always walk in, or we can pick you up at your hotel.

Your Sidemount BCD harness is made up of a bladder, sliding D-rings and bungee cords. Your tank position and trim will depend on their fit. Your instructor may spend a lot of time getting them right.

Gas

I arrived just two months ago on Malapascua Island in Philippines. There, I will learn how to become a Tec diver instructor. Since 2012, I've been a Bali recreational instructor. I am eager to improve my diving skills and expand my knowledge. Sidemount PCB was the place where my first experience of technical diving was. Tom West, PADI course director and instructor-trainer for Tec, made me a Certified Tec-50 Diver.

Backmounted doubles came into use in part because of the problems with backmounted independents and single orifice doubles, neither of which are as common in modern diving. Independents are two cylinders strapped to one’s back with independent regulators on each one. If a 1st stage was to fail the diver was down to one cylinder. Single orifice doubles were two cylinders linked together with a valve, and one 1st stage regulator. If a first stage failed on a single orifice doubles set all the gas would be lost. The isolated manifold doubles used today eliminate both of those problems. Each cylinder can be worked independently, but the diver can also breathe gas from both cylinders out of one regulator. This form of doubles is typically held together with metal bands and the valves are linked with an isolation manifold, allowing the two to be separate if needed. Backmounted doubles diving is similar to regular single cylinder backmount, offering a profile that is vertically the same.

Check our other pages :

Frequently Asked Questions

Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
 

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).