Skills (general): The introductory tech diver will practice the use of new equipment to trim and control buoyancy. This helps to build the foundation for efficient diving. Once you have a solid foundation, you can start practicing locomotion or move on to more advanced skills.
If you will not be using sidemount during your cave diver training, what you should be looking at is our CDS Basics Orientation course.
Divers must maintain a minimum level fitness and health. Some conditions such as chronic illness, recent surgery or medication may make it necessary to obtain written permission before you can dive.
Divers using decompression oxygen mix all types can extend their time looking at wrecks or reefs on the oceanfloor. The sport diver may be limited to two short dives at 100ft. A decompression diver can cruise the seas for 60 minutes or longer, getting more bang for his buck.
While most Sidemount divers use two tanks as a standard, you can also just use one tank (I was told it’s called ‘monkey’) or more than two tanks for deco dives.
Technical diving means that a diver is not allowed to reach the surface from any point during the dive. It could be due to a ceiling in the form of a cave/wreck or virtual ceilings created by decompression obligations. To avoid decompression sickness, you must perform mandatory stops on ascent when the NDL's are exceeded. This usually requires the use special equipment like Sidemounts and Twinsets. Twinsets and Sidemounts require special gas mixes, additional training, and twinsets/sidemounts to ensure that you can perform these stops correctly on ascent in order to maximize Nitrogen offgassing.
How To Become A Sidemount Technical Scuba Diver North Carolina
Rebreathers can increase your diving skills by using smaller cylinders. This can significantly increase the dive duration, especially when used for deeper dives. Rebreathers can be mounted sideways or back. It all depends on how they are configured.
The SSI technical-sidemount diver course allows you to take extended dives with four+ tanks (cylinders). Technical diving is easy with the technical sidemount course. You can learn to operate multiple cylinders at once. Config your sidemount gear. Learn how to make a tec sidemount harness. Also learn how adjust the sling tanks on your body.
International Training, parent organization to Technical Diving International / Scuba Diving International (TDI), and Technical Diving International / Scuba Diving International - offers both TDI and SDI versions of the Sidemount Diver course. Both courses have a lot in common. Both courses use identical learning materials (which we also wrote). So, what is the difference?
We offer the TDI course as an option, although we can also teach the SDI course if asked. This course can be taken on its own, or with the Apprentice Cave Diver course.
Sidemount Diver was by far the most challenging course I have ever taken. However, my instructor Fiona at Big Blue Tech (a trusted dive center) and Big Blue Tech (my instructor) included a lot of skills and dives in my course. We made sure to keep my task load manageable and practiced many skills including tank removal underwater, mask and tank replacement, out of the air drills, and many others while trying to stay in top trim.
Mentality: Technical diving is still fun. It's just as much about seeing cool objects, like sport diving. However, technical divers see sights that are longer, deeper, or hidden from sport divers. Technical divers are still a fun and focused group, but they also stay on the right track. There are still plenty of jokes, and there are many laughs. However, dive planning must be executed with seriousness. You are always at risk when you dive, even if you have the right skills and practice.
Sidemount diving requires only an Open Water Diver to begin. Although it's important to have excellent buoyancy and trim, you should also be able handle your equipment independently. Sidemount diving offers a whole new level of skill and equipment setup.
You don't need to worry about how all this will work. The course includes learning how to set-up your Sidemount equipment, as well as how to measure and adjust clips and bungees so that your tanks are in perfect trim. You will have your instructor to assist you in all aspects.
Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.
2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).