All types, all shapes: This three-dimensional cutting machine will cut carbon, stainless, aluminum and red metals; in round, square, rectangular and irregular shapes.
A second consideration is the fiber laser’s compact modules. They allow for redundancy. The resonator can still shut down when one module is having a problem. The fiber laser is redundant so that other modules can temporarily produce more power to support the down module while repairs are made. These can also be done in field. The fiber resonator may also continue to produce lower power until it can be repaired. The entire CO2 resonator can go down if it has an issue.
Traditional tube features can take a lot of time. FabLight makes it simple to have exactly what you want, and how you design it in just minutes.
The tube's inherent nature means that a laser generator is not required. While flat sheet laser cutting machines are now available with laser generators of up to 12 kW, tube-cutting machines typically require a maximum power of 5 kW. Tubes require you to be aware of the opposite side when cutting. A more powerful laser would cut through the tube's other side. (Officially, the tube laser can be used to process a beam or channel.
The most important criteria for the construction of fitness equipment are design, durability, usability, and compactness.
The most productive solution to tubes of any section. Tubes upto O 6" (152.4mm).2D cutCO2 (or fiber laser).
Fiber lasers can cut thin materials at high speeds. They are also very energy-efficient and require little maintenance. This laser cutting technology has special properties that allow for applications in steel, stainless steel, aluminum, as well as non-ferrous metals like copper and brass.
For large diameter tubes or profiles, CO2 is the best choice. Tubes up O 14/24" (355 mm/ 610mm) 3D cutting modeCO2 laser
Leaders in the manufacturing of advanced laser cutting solutions.
StarCut Tube, a laser tube cutter machine StarCut Tube, offers unparalleled precision with contour cutting accuracy of +/-5um.
StarFiber Series is a compact fiber laser series that can be combined with optional focusing head for laser cutting or welding. SmartWeld (tm) technology can be added for fine and wide welding.
You may have noticed we haven’t covered cutting speed. Although you can cut up 500 inches per minute using a tube cutter, it's not always practical. Laser tube cutting involves focusing on the time required to load a tube, index the tube so it's in a good position for cutting and then pierce, cut and unload the part. It is not about cutting speed, but part-processing time when laser tube cutting machines are used.
The weld seam is another consideration when tube cutting. This material is roll-formed, then welded together. Two points are usually required to be addressed.
Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.
A fiber laser cutting machine generates a laser beam using active optical fibers and transmits it to the machine's cutting head via a transport fiber. This extremely hot laser is condensed into a narrow beam and is used to cut through various metal thicknesses.