Tube Lasers Cutting Systems

Tube Laser Cutting Systems Rental

Motion Dynamics is a top manufacturer of neurological subassemblies. These include steerable catheters and "pullwire" assemblies. Motion Dynamics makes use of StarCut Tube machines for precise cutting of key components.

The StarFeed is an automated loader/unloader for the StarCut Tube laser cutting machine and is available in sizes S and L. This combination allows fully automated dry or wet cutting of tubes from 1-20 mm diameter. The StarFeed L stores up to 48 tubes and even allows the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. The end result is a big increase in productivity.

The fiber laser's small modules, which are compact and easily transportable, allow for redundancy. The resonator won't completely shut down if one module experiences a problem. In order to provide power for the down module, the fiber laser can temporarily produce more power until it is repaired. This can, of course, be done in the field. Sometimes, the fiber resonator will continue to produce reduced power until repairs are made. If a CO2 reactor has an issue, it can cause the whole resonator to go down.

These machines have a rock-solid cutting platform (the SL uses a minerals cast base) and offer unparalleled precision. Contoured cutting accuracy is better than +/-5um. The choice between a fiber laser and the new Monaco USP allows fine cutting of any kind of metal or polymer.

Tube Lasers Cutting Systems 3d Printing

NIT uses a Coherent Laser Cutting Machine to Vertically Produce Nitinol and Other Metal Components with outstanding precision and edge quality.

When making fitness equipment, the most important components are durability, usability, compactness, and design.

Tube Lasers Cutting Systems 3d Printing
Tube Lasers Cutting Systems Usa Inc

Tube Lasers Cutting Systems Usa Inc

Find the exact solution for your laser fabrication requirements while maintaining process quality and efficiency to both metal and other materials.

StarCut Tube Laser SL is the best laser cutting system for complex medical devices, such as stents and aortic valve replacements.

Tube Laser Cutting Systems Lebanon

Coherent StarCut Tube 'hybrid' version provides the highest flexibility for cutting medical devices made of metals or plastics. This machine integrates two lasers within a compact housing.

StarFeed, an automated loader/unloader of the StarCut Tube Laser Cutting Machine, is available in sizes S & L. This allows for fully automated dry or moist cutting tubes with diameters between 1 and 20 millimeters. StarFeed L holds up to 48 tubes. It also allows for the processing and storage of oval tubes. Its sensor-controlled gripping unit avoids damage. It results in a huge increase in productivity.

Tube Laser Cutting Systems 30w
Tube Laser Cutting Systems 30w

Medical device manufacturing is possible with precision and maximum uptime using Coherent Laser Systems for cutting, welding drilling, texturizing and marking.

The images of product are used for illustration purposes only. They may not represent the exact product. Gulf States Saw & Machinery Co., Inc. reserves every right to make changes to product specifications and images without prior notice.

Industry

With diameters ranging from 10 to 324 millimeters and pipe and profile lengths up to 12.5 meters, our system solutions offer the largest available selection for the flexible production of small and large series.

Cameras are being used by machinery manufacturers to inspect tubes. The quality check takes only about half an second, and the rotations required are reduced. This allows the machine's productivity to be maintained as well as its accuracy.

Frequently Asked Questions

Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.

A fiber laser cutting machine generates a laser beam using active optical fibers and transmits it to the machine's cutting head via a transport fiber. This extremely hot laser is condensed into a narrow beam and is used to cut through various metal thicknesses.