Tube Lasers Cutting Systems Dallas

Tube Laser Cutting Systems 80 Watt

StarFeed is an automated unloader/loader for StarCut Tube laser cutters. It is available in two sizes: S and L. These combination options allow fully automated dry and wet cutting of tubes up to 20 mm diameter. StarFeed L can store up to 48 tubes, and it even supports the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. This results in a significant increase in productivity.

StarCut Tubes SL is a laser cutting system that provides high accuracy, superior reliability, as well as high performance for cutting complicated medical devices such stents.

Every need has its own cutting technology. The materials to be processed, as well as the desired level of productivity and cutting quality, allow users to choose between CO2 and fiber laser cutting systems.

Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.

Tube Laser Cutting Systems Light

It is unnecessary to coordinate multiple orders and vendors. Gulf States Saw & Machinery Co., Inc. will handle everything, from material procurement through past delivery.

Another thing to consider is the modular design of the fiber laser. These modules are small enough to be carried in a briefcase and allow for redundancy. The resonator does not completely shut off if one module fails. The fiber laser acts redundantly in that it can produce more power temporarily in order to support the damaged module until repairs can take place. (This can, by the way can be done on the field). Other times, the fiber-resonator can continue producing lower power until repairs can take place. A CO2 resonator issue can lead to the complete resonator being down.

Tube Laser Cutting Systems Light
Steel

Steel

You will find the perfect solution for your laser fabrication needs, while still ensuring process quality and efficiency in both metal and nonmetal fabricating.

The fully-automatic solution that guarantees maximum productivity and fast production changes.Tube Ø Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

Final Accuracy

Machine manufacturers have begun using cameras to perform tube inspections. They can reduce the time it takes to inspect quality tubes and also reduce the amount of rotations needed. This allows for both productivity and accuracy to be maintained.

The fiber laser does not require as much maintenance. The fiber laser doesn't need to be cleaned as often as a CO2 laser cutter machine. The fiber laser does not require any preventive maintenance as long as it has access to clean chiller water and that the filters are regularly replaced.

What is a tube laser
What is a tube laser

Imagine putting a through hole centered on a tube. It should be centered according to the actual dimension and not just one side of the tube. Bowed tubes will make it more difficult. Tube fabricating is hard work.

You should remember that there are no perfect tubes. They have bows. They may protrude from the interior as well as the exterior of the tube. It is difficult to process this material in a consistent and rapid manner when there are such inconsistencies among products.

Tube Lasers Cutting Systems Houston Tx

Secondary operations can be eliminated: A tube laser can easily cut a piece of material to the desired length, add holes or other cutout designs in one step. This eliminates the need for manual material removal. This allows you to maintain tight tolerances for more complicated fabrications. You can make parts from one continuous piece. This allows you to ensure they fit in one direction and is easy to assemble. Tube laser aluminum, carbon and stainless steel can all be tubed.

You may have noticed that we haven’t discussed cutting speed yet. It is possible to cut up to 500 inches per minute on a tube, but that’s not always realistic. In laser tube cutting, the real focus should be on how long it takes to load a tube, index it so it’s in the right position for cutting, pierce and cut it, and unload the part. It’s more about part-processing time with laser tube cutting machines, not cutting speed.

Frequently Asked Questions

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.

What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.