Tube Lasers Cutting Systems Manufacturers

Tube Laser Cutting Systems 3kw Price In India

This fully-automatic solution guarantees maximum productivity as well as rapid production changes. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

Motion Dynamics is a leading manufacturer of neurological sub-assemblies, including steerable catheters and “pull-wire” assemblies, making use of our StarCut Tube machines for precision cutting of key components.

StarCut Tube SL combines an fs-laser to create complex metal shapes.

Another consideration in tube cutting is the weld seam. This material is roll-formed and welded together. This brings up two points that typically must be addressed:

Single Step

The SL has a rock-solid platform for cutting (the SL uses a base made of mineral casts). These machines provide the highest precision with contour cutting accuracy better than +/-5 um. The latest Monaco USP laser, or the fiber laser, allows for precise cutting of any type of metal or polymer.

Gulf States Saw & Machinery Co., Inc. works closely with you to create a program that meets your specific needs. We will examine the current production of your part, determine its end use and application, and then work with you to meet your needs.

Single Step
Cutting Machines

Cutting Machines

Because of the amount of power required to create a CO2 laser, it is less efficient and has a much lower wall plug efficiency when compared to a fiber laser. It follows that the large chillers required for the CO2 lasers need more overall power too. Given the fiber laser resonator’s wall plug efficiency of more than 40 percent, you are not only using less power, but also less of your in-high-demand floor space.

Fiber lasers are 10 percent shorter than CO2 laser beams in wavelength. Because of its shorter wavelength, fiber lasers produce a beam that is easier to absorb by reflective materials. A CO2 laser's wavelength is less likely to reflect off these surfaces. This allows fiber laser cutting machines to cut brass, bronze, and other reflective material. A CO2 laser beam that reflects on the material can damage not only its cutting lens, but the entire beam path. This risk can be eliminated by using fiber-optic cables to guide the beam.

Products

Fiber lasers cut in thin material with fast speeds. They also require little maintenance and are low in power consumption. This laser cutting technology's special properties allow applications in steel and stainless steel as well aluminum and non-ferrous metallics like copper or brass.

The high cutting speed of CO2 lasers is what makes them stand out. Their main application area is the medium-to-high range of material thicknesses. The laser beam cuts with high precision and is free from burrs. This allows the parts to be processed further without needing to be reworked.

What color should CO2 laser tube be
What color should CO2 laser tube be

Due to the high power needed to create a CO2 Laser, it is less efficient than a fiber-laser. Also, the large chillers that are required to make CO2 lasers work require more power. You are using less power due to the fiber laser's wall plug efficiency exceeding 40 percent. This means that you also use less of your floor space in high-demand areas.

Fiber lasers achieve high cutting speeds in thin material thicknesses. Additionally they boast low power consumption while requiring little maintenance.The special properties of this laser cutting technology enable applications insteel, stainless steel, aluminum, and non-ferrous metals, such as copper andbrass.

Square

Lasertube systems can be used to develop new applications and improve existing ones. This allows you to enter new industrial sectors, increasing profits, and allowing for new opportunities.

When you look closely at a fiber-laser in operation, some things may not be as obvious. A fiber laser's beam diameter is one-third larger than that of a co2 beam. This allows it to have a higher power density. This allows the fiber not only to cut faster but also to pierce much faster. The fiber's smaller beam size allows it to cut intricate shapes, and leave sharp edges. Imagine cutting the logo of your company from a tube where the spacing between the letters is 0.035inches. A fiber can achieve that cut while a laser with CO2 cannot.

Frequently Asked Questions

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Laser cutting pipe is the best way to achieve repeatable and precise cutting in applications where the precision of the cut itself is important.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.