Used Laser Tube Cutting Machine For Sale

Tube Lasers Cutting Systems Near Me

PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.

Profiles and tubes are widely used in all areas of engineering, from system construction to furniture manufacturing. The lasers have opened up new design possibilities. More and more designers are taking advantage the advantages of laser-cut profiles and tubes, thereby increasing their demand. Explore all the options for laser tube cutting, and learn more about TruLaser Tube machines.

Coherent StarCut Tube 'hybrid' version provides the highest flexibility for cutting medical devices made of metals or plastics. This machine integrates two lasers within a compact housing.

StarFeed, an automated loader/unloader of the StarCut Tube Laser Cutting Machine, is available in sizes S & L. This allows for fully automated dry or moist cutting tubes with diameters between 1 and 20 millimeters. StarFeed L holds up to 48 tubes. It also allows for the processing and storage of oval tubes. Its sensor-controlled gripping unit avoids damage. It results in a huge increase in productivity.

Why is my laser not cutting

PowerLine C is a CO2 laser-based system for precision drilling, cutting and scribing of many non-metals including glass and organic materials.

Take a glimpse into our StarCut Tube lab and production area and find out more about these fully-automated, multi-axis CNC machines for tubes and flat materials, including medical devices such as catheter shafts, stents, hypotubes, PTCA devices, TAVR, etc.

Why is my laser not cutting
Machine

Machine

Fully-automatic solution that ensures maximum productivity and rapid production changes. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

There is no downtime, extended lead times or downtime: We combine a tube mill with a tube laser in one facility so that we can get your project through each stage without any delays or gaps. We can provide full service for your project.

Why do vinegar soaks after CO2 laser

All types, all shapes: This three-dimensional cutting machine will cut carbon, stainless, aluminum and red metals; in round, square, rectangular and irregular shapes.

A second consideration is the fiber laser’s compact modules. They allow for redundancy. The resonator can still shut down when one module is having a problem. The fiber laser is redundant so that other modules can temporarily produce more power to support the down module while repairs are made. These can also be done in field. The fiber resonator may also continue to produce lower power until it can be repaired. The entire CO2 resonator can go down if it has an issue.

Tube Lasers Cutting Systems Europe
Tube Lasers Cutting Systems Europe

Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.

Fiber lasers can be used to cut reflective materials and provide precise cutting. They are almost maintenance-free. They can also cut certain thicknesses of metal faster than CO2 lasers. But speed is only relative when cutting tube. Speeding up the process of cutting tube and producing finished products can make time savings.

Tube Laser Cutting Systems 1390

With a rock-solid cutting platform (the SL uses a mineral cast base) these machines offer the ultimate in precision, with contour cutting accuracies better than +/- 5 µm. A choice of fiber laser or the latest Monaco USP laser enables fine cutting of any polymer or metal.

StarCut Tube L 600 has a choice of three laser options: a fiber laser or a USP. StarCut Tube SL has the smallest footprint of any model on the market.

Frequently Asked Questions

Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.

A fiber laser cutting machine generates a laser beam using active optical fibers and transmits it to the machine's cutting head via a transport fiber. This extremely hot laser is condensed into a narrow beam and is used to cut through various metal thicknesses.