StarCut Tube is a tube-cutting laser machine that offers precision up to +/- 5um.
Gulf States Saw & Machinery Co., Inc. is able to manufacture tube lasers for customers, allowing them to eliminate manual processes and maximize the cutting process.
Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.
Of course, the fiber laser doesn’t need as much attention in terms of maintenance. It doesn’t require mirror cleaning and bellows checks that a CO2 laser cutting machine needs. As long as it gets clean chiller water for cooling and the air filters are routinely replaced, the fiber laser itself is free of preventive maintenance.
Imagine you are required to place a throughhole in a tube. The tube must be centered at the correct dimension. The tube should not be bent. That's tube fabrication.
Remember that checking for bends or bows in the tube using traditional methods can take five to seven seconds before cutting starts. The traditional method of touch sensing is not as accurate as it was. This means you must compromise productivity in order to achieve accuracy. Even though it may seem like a lifetime in the age fiber laser cutting technology, tube work isn't as easy as sheet metal.
These images are intended to be used as illustrations and may not accurately represent the product. Gulf States Saw & Machinery Co., Inc. reserves all rights to modify product specifications and images at any time.
StarCut Tube® SL laser cutting system provides the highest precision, reliability and performance for complex medical devices like stents, aortic valves replacements or hypotubes.
TruLaser Tube 3000 Fiber is a worthwhile laser tube cutter. It is affordable even when not in use. It is ideal for beginners or as an additional machine due to its reliability.
Parts are held in place with automatic tabbing, done in FabCreator and a set o jaws on each drive chuck or idler chuck.
The CO2 solution for large diameter tubes and profiles.Tubes up to Ø 14" / 24" (355 mm / 610 mm)3D cutting modeCO2 laser
This is the tube laser cutting solution that offers the most versatility. Tubes up to O9.45" (240mm)3D Cutting modeCO2 or Fiber Laser
We can complete your project in one facility with no downtime and extended lead times. We offer full-service center support that can:
A laser cutter that cuts sheet metal can transform a sheet of paper in seconds. You can also do the same with a laser tube cutter machine but it is a completely different story about how it is done.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.