Tube Laser Cutting Systems New Zealand

What are the disadvantages of a laser cutter

Cambus Medical uses Coherent StarCut Tube to cut tubes and Select Laser Welders in order to build business success.

Reduce the amount of components and save time. You can make tubular frames or metal structures that are easier to assemble and more precise. Your part can be completed in just one programming step and in one machining step.

Lasertube systems, our 2D or 3D laser cutting system for tubes, bars, profiles and tubes from 12 mm up to 610mm (.5" to 24-") in diameter and 18 m (60") in length, are called Lasertube systems.

StarFiber Series combine compact fiber lasers with optional focusing heads for laser welding or cutting, including SmartWeld™ technology for fine and wide welds.

Laser Technology

Whether it is the manufacture of specific equipment for gyms, or smaller, multifunctional exercise machines for domestic spaces, tubes are the fundamental building blocks. This is why tube processing technologies, such as bending and laser cutting, are so widely used in this sector.

Combination laser system for tube- and sheet metal cutting. Tubes upto O4.72" (120mm).Sheets from 236" x79" (6000mmx2000mm)Fiber Laser

Laser Technology
What is the difference between a tube cutter and a pipe cutter

What is the difference between a tube cutter and a pipe cutter

PowerLine C are CO2 laser-based systems for precision drilling, cutting, scribing, marking, and engraving of many non-metals, including glass, organic materials.

We offer you the ideal solutions for the world of laser tube cutting. Find out here how lasers can eliminate entire process steps while also increasing the range of parts you can produce.

Time

Even for XXL tubing, it is built for maximum productivity. This machine has a solid-state laser that can be used in a variety of ways to produce tubes and profiles from varying materials and wall thicknesses.

This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser

How long does a 50w laser tube last
How long does a 50w laser tube last

Lasertube makes it easy to customize parts according to the requirements of your customers.

Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.

Design

This is your easiest route to tube laser cutting. Tubes as large as O 4,72" (120mm).2D cutter laser

The TruLaser Tube 5000 fiber can achieve record speeds. It fully exploits the strengths of solid state lasers. This allows for faster processing times and the possibility of assembling many parts.

Frequently Asked Questions

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.

What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.