Traditional tube features can be tedious. FabLight makes getting exactly what you want and how it was designed easy. It takes just minutes.

Design, durability, usability and compactness are the most important construction standards in the production of fitness equipment.

Use Coherent laser systems to cut, weld, drill, texturize, and mark medical devices for precision manufacturing.

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

Tube Laser Cutting Systems 80w

Some things aren’t quite as evident until you take a closer look at a fiber laser in operation. Because its beam diameter is often one-third the size of a CO2 beam, a fiber laser has a greater power density than a CO2 laser beam. Not only does this allow the fiber to cut faster, but it also allows it to pierce faster. This smaller beam size also gives the fiber the ability to cut intricate shapes and leave sharp edges. Imagine cutting a company logo out of a tube when the spacing between the logo’s letters is 0.035 inch; a fiber can make that cut, while a CO2 laser can’t.

StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.

Tube Laser Cutting Systems 80w
Tube Lasers For Sale

Tube Lasers For Sale

Find the exact solution for your laser fabrication requirements while maintaining process quality and efficiency to both metal and other materials.

StarCut Tube Laser SL is the best laser cutting system for complex medical devices, such as stents and aortic valve replacements.

Tube Laser Cutting Systems Expo

With diameters ranging from 10 to 324 millimeters and pipe and profile lengths up to 12.5 meters, our system solutions offer the largest available selection for the flexible production of small and large series.

Cameras are being used by machinery manufacturers to inspect tubes. The quality check takes only about half an second, and the rotations required are reduced. This allows the machine's productivity to be maintained as well as its accuracy.

Used Tube Laser
Used Tube Laser

Medical device manufacturing is possible with precision and maximum uptime using Coherent Laser Systems for cutting, welding drilling, texturizing and marking.

The images of product are used for illustration purposes only. They may not represent the exact product. Gulf States Saw & Machinery Co., Inc. reserves every right to make changes to product specifications and images without prior notice.

Tube Laser Cutting Systems Quilting

The fiber laser's small modules, which are compact and easily transportable, allow for redundancy. The resonator won't completely shut down if one module experiences a problem. In order to provide power for the down module, the fiber laser can temporarily produce more power until it is repaired. This can, of course, be done in the field. Sometimes, the fiber resonator will continue to produce reduced power until repairs are made. If a CO2 reactor has an issue, it can cause the whole resonator to go down.

These machines have a rock-solid cutting platform (the SL uses a minerals cast base) and offer unparalleled precision. Contoured cutting accuracy is better than +/-5um. The choice between a fiber laser and the new Monaco USP allows fine cutting of any kind of metal or polymer.

Frequently Asked Questions

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Laser cutting pipe is the best way to achieve repeatable and precise cutting in applications where the precision of the cut itself is important.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.