Tube Lasers

Tube Laser Cutting Systems 500w

Lasertubes are 2-D and 3-D laser-cutting systems for tubes, bars, and profile. Available in diameters of 12 mm to610 mm (.5"-24"), and up 18 m (60').

Cambus Medical uses Coherent StarCut Tube and Select Laser Welders laser-powered tubes cutting machines to create business success.

Tubes are and will continue to be used throughout the entire industry, including in system and mechanical engineering as well as furniture construction. New design possibilities have been opened by lasers. This means that more and more designers are utilizing the benefits of laser-cut tube and profile cutting, which is driving up demand. TruLaser Tube machines offer all-round solutions in the field of laser tube cutters.

Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting system integrate intelligent functions such as monitoring, setting up, and cutting. These automated functions increase machine efficiency and ease-of-use. The wide range of capabilities offered by Gulf States Saw & Machinery Co., Inc.’s tube and pipeline lasers make these machines suitable for many industries and a variety if applications.

Can you laser cut a pipe

Traditional tube features can be tedious. FabLight makes getting exactly what you want and how it was designed easy. It takes just minutes.

Design, durability, usability and compactness are the most important construction standards in the production of fitness equipment.

Can you laser cut a pipe
Tube Lasers Cutting Systems Jacksonville Fl

Tube Lasers Cutting Systems Jacksonville Fl

North America's top magazine for the metal forming/fabricating industry is The FABRICATOR. The magazine offers news, technical information, and case histories to assist fabricators in doing their jobs more efficiently. Since 1970 the FABRICATOR served the industry.

Some things are obvious. A fiber laser has a smaller laser "generator" than a CO2-resonator. Actually, the fiber laser is made by banks of diodes which are combined in a small module. These modules can have a power range from 600 to 1,500 W. To create the final powered resonance, multiple modules are spliced together. This is usually the same size as a small filing cupboard. The fiber-optic cables channel the light and amplify it. Fiber-optic cables transmit the same light as when they were generated, with no loss of power and quality. The fiber-optic cable is then adjusted and focused to cut the appropriate material.

Laser-cut

Some things aren’t quite as evident until you take a closer look at a fiber laser in operation. Because its beam diameter is often one-third the size of a CO2 beam, a fiber laser has a greater power density than a CO2 laser beam. Not only does this allow the fiber to cut faster, but it also allows it to pierce faster. This smaller beam size also gives the fiber the ability to cut intricate shapes and leave sharp edges. Imagine cutting a company logo out of a tube when the spacing between the logo’s letters is 0.035 inch; a fiber can make that cut, while a CO2 laser can’t.

StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.

Do laser engravers use a lot of electricity
Do laser engravers use a lot of electricity

Metal fabricators understand the benefits of fiber laser cutting technology in flat sheet processing. But do they know what it can do for tube and tube cutting? You can actually find quite a bit.

Laser systems are available for electronics manufacturing. They can perform cutting, welding marking, marking, and ablation with high precision.

How thick can a fiber laser cut

Use Coherent laser systems to cut, weld, drill, texturize, and mark medical devices for precision manufacturing.

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

Frequently Asked Questions

The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.

CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.